HP MSR SERIES, Руководство по настройке

Страница: 183 / 889

166
• Enter IP address 5.5.5.5 , the IP address of Host D.
•
Select Permanence for this blacklist entry.
•
Click Apply .
• Click Add and then perform the following configurations, as shown in Figure 167 :
Figure 167 Adding a blacklist entry for Host C
•
Enter IP address 192.168.1.5 , the IP address of Host C.
•
Select Hold Time and set the hold time of this blacklist entry to 50 minutes.
• Click Apply .
# Configure intrusion detection: Enable scanning attack protection, and enable blacklist function for it;
enable Land attack protection and Smurf attack protection.
• Select Security Setup > Attack Defend > Intrusion Detection from the navigation tree and then
perform the following configurations, as shown in Figure 168 .
Figure 168 Configuring intrusion detection