horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 170 / 308

The drain valve of the hand washing tank is lo-
cated on the left-hand side of the access ladder.
Drain for hand washing tank
A soap dispenser for hand cleaning is located
to the left of the access ladder.
Soap dispenser
Spraying pump
The crop protection sprayer is equipped with a
centrifugal pump for the spraying system. This is
located behind the illuviation valve. The pump is
hydraulically driven via a proportional valve and
adjusts to the required quantities.
Spraying pump
The pump used does not require pulsation
damping, because centrifugal pumps generate
continuous flow and pressure.
¾
The spraying pump installed in this machine
is nearly maintenance-free!
¾
The spraying pump is not equipped with dry
running protection and may therefore be oper-
ated only temporarily without fluid!
NOTE
Fill the pump with fluid before initial commission -
ing and after each draining before switching on.
Technical data:
Type
Hypro 9316C3U-M10
Hypro 9315S3U-M10
Flow rate in l/min at
0 bar
approx.1000 l [264 gal]
Flow rate in l/min at
5 bar
approx. 550 l [145 gal]
Maximum pressure
in bar
8 [116 psi]
166 167