horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 262 / 308

Suction filter
CAUTION
Spraying mixture running out! Wear personal
protective outfit!
NOTE
¾
Clean the filter after suctioning contaminated
water.
¾
The suction filter should be cleaned daily
to prevent dirt deposits in it. In addition, the
pressure output should be rinsed.
The suction filter of the centrifugal pump located
to the left of the illuviation valve.
Centrifugal pump suction filter
Cleaning the centrifugal pump suction filter
of water systems Basic and CCS
1. Turn the suction side vale to the suction filter
maintenance position.
2. Drain the filter housing. Open the valve for
this purpose. Collect used fluid and dispose
of properly.
3. Unscrew the lid of the filter housing.
4. Remove the filter and clean/change it. Collect
the deposits in a suitable tank and dispose
of properly.
5. Insert the cleaned/new filter again and close
the filter housing with the lid. Close the lock
valve again.
6. Turn the suction side valve to the desired
position.
NOTE
Clean the thread of the filter housing if soiled.
Cleaning the centrifugal pump suction filter
of water systems Basic Pro and CCS Pro
1. Actuate the Filter cleaning function on the
external control terminal. A note appears
on the terminal that the filter can now be
cleaned/replaced. Confirm the message with
“ENTER”.
2. Drain the filter housing. Open the valve for
this purpose. Collect used fluid and dispose
of properly.
3. Unscrew the lid of the filter housing.
4. Remove the filter and clean/change it. Collect
the deposits in a suitable tank and dispose
of properly.
5. Insert the cleaned/new filter again and close
the filter housing with the lid. Close the lock
valve again.
6. Deactivate the Filter cleaning function on the
external control terminal.
NOTE
Clean the thread of the filter housing if soiled.
258 259