horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 111 / 308

Arm rest
The left arm rest can be folded back and ad-
justed in height, if required.
To adjust the height of the arm rest pry the round
cap off the covering and loosen the hexagon nut
(spanner width 13 mm) behind it. Move the arm
rest to the desired position (5 catch positions)
and tighten the hexagon nut (25 Nm)[18 ft lb].
Replace the covering cap.
Armrest inclination
The longitudinal inclination of the arm rest can
be changed by turning then hand-wheel.
Turning towards the outside lifts the armrest at
the front, turning towards the inside lowers it at
the front.
Backrest adjustment
Pull the lever up to adjust the backrest. Do not
press against the backrest while unlocking it.
The desired position is reached by simultane-
ously loading and unloading the backrest. Re-
lease the lever to lock again.
NOTE
After locking it should be impossible to move
the backrest to any other position.
Lumbar support
By pressing the Plus or Minus switch on the rear
of the backrest, the bulge of the backrest can be
adjusted individually.
106 107