horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 285 / 308

Maintenance location Work instructions Interval
Air filter
Check / clean preliminary filter system 600 h
Replace element
1200 h or
annually
Replace safety element
2400 or
2 years
Cooling system, turbocharger
Check / inspect antifreeze mixture 100 h
Check hose connections and ports for firm seating 600 h
Air conditioning system
Check air conditioning as required
Replace air conditioning system drier cartridge as required
Changing oil of air-conditioning compressor as required
Change refrigerant as required
Sliding axle
Visual inspection for damages/wear daily
Retighten grub screws and locking nuts.
mechanical: Pre-clamping 40 Nm [30 ft lb]; after-clamping
80 Nm [60 ft lb] (in addition, after 100 h following
adjustment)
Locking nut 180 Nm [133 ft lb]
hydraulic: Pre-clamping 40 Nm [30 ft lb]; after-clamping
80 Nm [60 ft lb]
Locking nut 180 Nm [133 ft lb]
After 100,
600, 1200,
2400 h etc.
Height adjustment
Visual inspection for damages/wear daily
Retighten all securing bolts (mechanical and hydraulic
height adjustment)
After 100,
600, 1200,
1800 h etc.
(in addition,
after 100 h
following
adjustment)
Check the distance of lifting bridge to suspension sled,
readjust if necessary; (mechanical and hydraulic height
adjustment)
• Lower travel position: 410 ± 5 mm [16 ± 0.2 in]
• High travel position: 10 ± 5 mm [0.4 ± 0.2 in]
After 100,
600, 1200,
1800 h etc.
(in addition,
after 100 h
following
adjustment)
Suspension
Leeb VL:
Check all rubber or plastic parts (air springs, bottom rubber
bumpers) for damage or porosity
daily
Leeb VN:
Check all rubber or plastic parts (bottom rubber bumpers)
for damage or porosity
daily
280 281