horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 120 / 308

NOTE
The exact functions of the individual buttons
and switches will be explained in the associated
chapters!
Drive lever
The direction of travel and speed can be set with
the drive lever. The release button on the rear
of the drive lever must therefore be pressed in
addition.
forward travel / acceleration
default headland
management
reverse travel / deceleration
Reversing
With manual steering, the rear axle is steered
by moving the drive lever to the left or right.
Reversing and headland management are then
no longer possible.
Transport / Service position
The transport and service modes are only avail-
able on machines with hydraulic height adjust-
ment and when the parking brake is engaged.
¾
Brief push of button:
The machine lowers to service mode. The
height adjustment is driven all the way down.
The spring accumulators remain filled with
pressure.
¾
Long push of button:
The machine lowers to transport mode. The
height adjustment is driven all the way down.
The spring accumulators are emptied and run
without pressure.
¾
In transport or service mode:
Brief push of button: The machine returns to
normal suspension mode.
¾
In service mode:
Long push of button: The machine switches
to transport mode.
Travel direction switch
After starting the engine and releasing the park-
ing brake the travel direction must be selected.
This is done via the travel direction switch.
¾
Lever forward = Pre-selection for forward
travel
¾
Lever backward = Pre-selection for backward
travel
116 MF