horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 146 / 308

Perform visual check of the filter system
¾
Check air ducts for leaks and damages.
¾
Check cable routing for chafing.
¾
Repair any damages to the paint coat or any
corrosion that has been detected profession-
ally.
¾
Deactivate the filter system if damages such
as cracks can be detected and contact the
sales partner.
Replace the filter
¾
Make sure that the machine is outside the
contaminated area.
¾
Switch off the ignition.
¾
Clean the filter box.
¾
Release the catch (3) of the plug (1).
¾
Pull off the plug (1) from the filter box (2) to
interrupt the power supply.
Remove the filter
¾
Unlock the snap locks (1) and open the lid (2)
of the filter box.
¾
Depending on the maintenance interval,
remove the filter in the order dust filter (3)
aerosol filter (2), activated-carbon filter (1).
¾
Clean the housing with a moist cloth.
¾
Check housing and seals for damage.
Install the filter
WARNING
Entry of toxic substances into the cabin due to
fitting the filter box with wrong inserts. Risk of
poisoning!
¾
Make sure that the inserts fitted into the filter
box meet the cabin category on the identifi -
cation.
¾
Adapt the identification of the cabin category
when modifying the filter system.
¾
Insert new filters in the activated-carbon filter
(1) aerosol filter (2), dust filter (3). Make sure
the seal of the filters points upward.
¾
Ensure that the filters are seated securely.
¾
Close the lid (2) of the filter box and lock the
snap locks (1).
142 143