Harmony eXLhoist, Руководство пользователя

Страница: 89 / 228

Installation and Wiring
EIO0000001505 12/2014
89
Power Supply
Protective Earth Ground
The electrical isolation of the Base Station power supply from machine ground could cause static
electricity damages. The limit switch could unintended operates in case of ground fault.
The equipment could non-stop in case of ground fault detections on any control circuits.
Factory Setting
For details on factory setting (wiring and configuration), refer to factory setting description
( see page 94 ) .
Q10…Q16 (NO type)
Q17, Q18 (NO+NC type) Auxiliary relays ( see page 99 )
Selector ( see page 102 )
UOC ( see page 105 )
Specific relays ( see page 109 )
Input/Output Possible uses (Depending of the configuration)
NOTICE
INOPERABLE EQUIPMENT
The ZARB•H Base Station must be powered with a voltage:

From 24 Vac -15% to 48 Vac +10% with frequency of 50 Hz -6%/+4% and frequency of 60 Hz
-6%/+4%.

From 24 Vdc -15% to 48 Vdc +20%.
The ZARB•W Base Station must be powered with a voltage:

From 24 Vac -15% to 240 Vac +10% with frequency of 50 Hz -6%/+4% and frequency of
60 Hz -6%/+4%.

From 24 Vdc -15% to 240 Vdc +20%.
Failure to follow these instructions can result in equipment damage.
WARNING
UNINTENDED EQUIPMENT OPERATION
Connect the Base Station protective earth ground connection to the machine ground.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.