Harmony eXLhoist, Руководство пользователя

Страница: 107 / 228

Installation and Wiring
EIO0000001505 12/2014
107
Safeguarding Function
Overview
The ZARB18• Base Station implement 12 inputs IN7…IN18.
These inputs are dedicated for limit switches to provide a protection to the hoist system.
Description
There are 4 limit switches per axis that allow to:

Stop the motion at minimum mechanical position.

Disable the high speed of the direction when the hoist system is near the minimum position.

Stop the motion at maximum mechanical position.

Disable the high speed of the direction when the hoist system is near the maximum position.
These inputs are associated to motion buttons.
Once a limit switch is opened, the associated motion relay(s) is(are) switched OFF.
You can configure the limit switches with the eXLhoist Configuration Software
( see page 194 ) .
Installation Principle
Principle of safeguarding function installation for 1 axis:
1 Mechanical target for limit switch triggering for stopping the motion direction
2 Mechanical target for limit switch triggering for slowing the motion direction
3 Mechanical target for limit switch triggering for slowing the motion direction
4 Mechanical target for limit switch triggering for stopping the motion direction
5 Stationary part
6 Mobil part
7 Motion (example: button 1 or 1H)
8 Motion (example: button 2 or 2H)
General Wiring Rules
The I/O and power supply cables should be AWG 16 (cross-sectional conductor area = 1.3 mm
2
).
The I/O and power supply cable lengths should not exceed 20 m (65.6 ft).
For more details, refer to Wiring Best Practices
( see page 91 ) .