Harmony eXLhoist, Руководство пользователя

Страница: 114 / 228

Installation and Wiring
114
EIO0000001505 12/2014
First Commissioning
Overview
The following procedures describe the first commissioning of a Wireless Remote Control System
from a pack (Base S Remote Device).
The installation must be in accordance to the factory setting
( see page 94 ) .
In other case, refer to eXLhoist Configuration Software ( see page 201 ) and the Discovery
procedure description ( see page 137 ) .
First Commissioning with 1 Base Station and the ZART8L
Result: The Wireless Remote Control System is in STOP mode ( see page 123 ) .
First Commissioning with 1 Base Station and the ZART•D
Step Action
1 Charge the Remote Device for more than 20 minutes.
2 Install the Base Station.
3 Power ON the Base Station.
4 Place yourself to an appropriate distance from the Base Station (around 10 m (32.8 ft)).
5 Press only the ON/START/Horn button more or equal than 1 s.
6 Wait for the E-STOP LED to be permanently ON.
Step Action
1 Charge the Remote Device for more than 20 minutes.
2 Install the Base Station.
3 Power ON the Base Station.
4 Place yourself to an appropriate distance from the Base Station (around 10 m (32.8 ft)).