Harmony eXLhoist, Руководство пользователя

Страница: 120 / 228

Using The Wireless Remote Control System
120
EIO0000001505 12/2014
Power ON
Overview
The aim is to describe how to power ON the Wireless Remote Control System.
Triggering Procedure
Result: The Remote Device is powered ON.
The discovery procedure is automatically launched. If the Wireless Remote Control System has
been installed correctly, the Wireless Remote Control System goes automatically in STOP mode
( see page 123 ) .
In other case, refer to the discovery description ( see page 137 ) .
Release
The Remote Device is powered OFF:

By the Power OFF procedure ( see page 128 ) .

Automatically when the Remote Device battery level is too low.

Automatically after the Power-saving time-out. You can configure the Power-saving time-out in
the XAR Configuration software
( see page 193 ) .
Step Action
1 Check that the Remote Device is powered OFF.
2 Power ON the Base Station.
3 Press only the ON/START/Horn button more or equal than 1 s.