Harmony eXLhoist, Руководство пользователя

Страница: 102 / 228

Installation and Wiring
102
EIO0000001505 12/2014
Selector
Description
In SINGLE configuration, the Selector button is associated to 2 relays.
With an adapted wiring, these relays enable/disable the motions of the selected device
(hook/trolleys).
In TANDEM configuration, no relays are associated with the selector button. The button is used to
select directly which Base Station are piloted.
You can configure the selector with the eXLhoist Configuration Software
( see page 194 ) .
General Wiring Rules
The I/O and power supply cables should be AWG 16 (cross-sectional conductor area = 1.3 mm
2
).
The I/O and power supply cable lengths should not exceed 20 m (65.6 ft).
For more details, refer to Wiring Best Practices
( see page 91 ) .