Harmony eXLhoist, Руководство пользователя

Страница: 150 / 228

Diagnostic
150
EIO0000001505 12/2014
Diagnostic Mode
Overview
To test the Wireless Remote Control System configuration, the ZART•D has a specific diagnostic
mode display.
Procedure to Activate the Diagnostic Mode
The diagnostic mode on the ZART•D indicates the inputs and relays states of the Base Station.
Diagnostic Display Description
In STOP mode, use the buttons 5 and 6 to alternate between the 3 screens:

Base Station information:

ID

Hardware version

Firmware version

Remote Device information:

ID

Hardware version

Firmware version

Remote Device battery information (only for Schneider-Electric use).
In START mode, the Remote Device displays dynamically the I/O status:
1 IN1...IN18 states: up for input = 1, down for input = 0
2 Relays 1...18 states: up for output = 1, down for output = 0
Step Action
1 Go to STOP mode ( see page 123 ) .
2 Simultaneously press the buttons 1 and 2, and release immediately.
3 Less than 5 seconds later, simultaneously press the buttons 3 and 4.
4 Release the buttons 3 and 4.