Harmony eXLhoist, Руководство пользователя

Страница: 94 / 228

Installation and Wiring
94
EIO0000001505 12/2014
Factory Setting Description
General Parameters
Detected Applicative Alarms
Base Station wiring:
Safeguarding function (only for ZARB18•)
Base Station wiring:
General Label Factory setting value
Parameter Start access sequence ( see page 192 ) Enable: 5, 6, 5, 6
E-STOP RESET sequence ( see page 192 ) Disable
Standby Time-out ( see page 193 ) 15 minutes
Power saving Time-out ( see page 193 ) 15 minutes
Horn duration ( see page 193 ) 2 seconds
Protection Configuration File Transfer Password ( see page 183 ) Enable: 5, 6, 5, 6
Label Wiring description Factory setting description
IN1 Sensor input Overload pre-alarm
IN2 Sensor input Overload alarm
IN3 Sensor input Over wind pre-alarm
IN4 Sensor input Over wind alarm
IN5 Sensor input Over speed alarm
IN6 Sensor input Generic alarm
IN_COM Common output port (to be connected to the other side of
the dry contact connected to the IN1…IN6 inputs) -
Label Wiring description Factory setting description
IN7 Limit switch input (for button 1) When IN7 is activated, the relay 1 is OFF
IN8 Limit switch input (for button 1H) When IN8 is activated, the relays 1 and 3 are OFF
IN9 Limit switch input (for button 2) When IN9 is activated, the relay 2 is OFF
IN10 Limit switch input (for button 2H) When IN10 is activated, the relays 2 and 3 are OFF
IN11 Limit switch input (for button 3) When IN11 is activated, the relay 4 is OFF
IN12 Limit switch input (for button 3H) When IN12 is activated, the relays 4 and 6 are OFF
IN13 Limit switch input (for button 4) When IN13 is activated, the relay 5 is OFF
IN14 Limit switch input (for button 4H) When IN14 is activated, the relays 5 and 6 are OFF