Harmony eXLhoist, Руководство пользователя

Страница: 145 / 228

Using The Wireless Remote Control System
EIO0000001505 12/2014
145
NOTE: If the system is in START mode, it goes automatically in STOP mode at the connection of
the charger.
5 Wait for around 15 minutes.
During the charge:

ZART8L: the battery LED is flashing.

ZART•D: the blinking battery symbol indicates the battery level:
The battery is fully charged when:

ZART8L: the battery LED is permanently ON.

ZART•D: the battery symbol is permanently displayed.
For more details, refer to Diagnostic ( see page 153 ) .
NOTE: The time duration for charge or the Remote Device depends on the ambient
temperature.
6 Unplug the charger to the dedicated power source.
7 Unconnect the charger to the Remote Device battery recharge connector.
8 On the bottom of the Remote Device, place back the protective cap.
Step Action