Harmony eXLhoist, Руководство пользователя

Страница: 172 / 228

eXLhoist Configuration Software
172
EIO0000001505 12/2014
Toolbar
Introduction
The toolbar is a panel at the top of the main window which provides access to the main commands
using icons.
The toolbar can be turned on or off by selecting
View → Toolbar from the menu bar.
Description
The illustration shows the eXLhoist Configuration Software toolbar:
Element Description
1 Go to Start Page : Displays the start page, any opened project must be closed. If the project is
not saved, a dialog box asks to save the project.
2 New Project : Creates new project, any opened project must be closed. If the project is not
saved, a dialog box asks to save the project.
3 Open Project : Opens a project saved on your computer.
4 Save : Saves modifications to an existing project.
5 Save As : Saves an open project under a name and/or in a new location.
6 Page Setup : Ables to configure the printing page setup.
7 Print Preview : Displays the print preview.
8 Print : Prints the project.
9 Identify Device ( see page 189 )
10 Edit Connection ( see page 182 ) .
11 Connect to Device : Establishes the connection between the remote and the software.
12 Disconnect from Device : Disconnects the connection between the remote and the software.
13 Load From Device : Loads the parameters from the connected remote to the project file.
If no project is opened, this command loads the remote information to the project file.
If a project is opened, this command loads the remote configuration to the project. Project data
are overwritten.
14 Store to Device : Transfer configuration from project to the remote.
If no project is opened, this command downloads the existing project file information to the
remote.
If a project is opened, this command transfers the project information to the remote.