Harmony eXLhoist, Руководство пользователя

Страница: 123 / 228

Using The Wireless Remote Control System
EIO0000001505 12/2014
123
STOP
Overview
In STOP mode, the motion/auxiliary relays are disabled and the safety relays are OFF.
Triggering Procedure
The STOP mode is reached in the following cases:

The OFF/STOP button is pressed (the Wireless Remote Control System was previously in
START mode).

No button pressed for more than the configured time-out (Standby time-out) configured in
eXLhoist Configuration Software
( see page 191 ) .

Wireless connection lost (out of range for example).

Remote Device accelerometer triggering due to:

A shock on the Remote Device

The Remote Device fall
Triggering procedure when the Wireless Remote Control System is in START mode:
Wireless Remote Control System In STOP Mode
Remote Device:
ZART•D display from START mode to STOP mode:
Step Action
1 Check that the Wireless Remote Control System is in START mode.
2 Press the OFF/STOP button.
Reference Description
ZART8L

The START LED is OFF.

The E-STOP LED is ON.
ZART•D

The STOP mode symbol is displayed.

The E-STOP LED is ON.