Harmony eXLhoist, Руководство пользователя

Страница: 124 / 228

Using The Wireless Remote Control System
124
EIO0000001505 12/2014
The Base Station execute the following steps:
1 The motion/auxiliary relays are OFF.
2 If configured, the UOC relays are OFF after a pre-configured time delay.
3 The safety relays are OFF.
Base Station:
Release
From this mode, you can:

Charge the Remote Device battery ( see page 143 ) .

Power OFF the Remote Device ( see page 128 ) .

Go to START mode ( see page 125 ) .
Specifics Information
You can configure the Time-Out Auto-Standby duration in the eXLhoist Configuration Software
( see page 191 ) .
Element Description
Relays

The safety relays are OFF.

The motion/auxiliary relays are OFF.

The “Radio link” relay is ON.

The “Safety relay image” relay is ON.
LEDs

The STATUS LED is blinking.

The POWER LED is ON.

The COM LED is blinking.