Harmony eXLhoist, Руководство пользователя

Страница: 93 / 228

Installation and Wiring
EIO0000001505 12/2014
93
Rules for Screw Terminal Block
The following tables show the cable types and wire sizes for a 5.08 mm pitch screw terminal block:
The use of copper conductors is required.
The use of cable ends is required.
WARNING
UNINTENDED EQUIPMENT OPERATION
Power line must be wired and protected with fuse or thermal magnetic switch (ex: Schneider-
Electric GV2) in compliance with local and national regulatory requirements for the rated current
and voltage of the particular equipment.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
DANGER
FIRE HAZARD
Use only the recommended wire sizes for I/O channels and power supplies.
Failure to follow these instructions will result in death or serious injury.
NOTICE
INOPERABLE EQUIPMENT
Do not tighten screw terminals beyond the specified maximum torque (Nm / lb-in.).
Failure to follow these instructions can result in equipment damage.