manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 18 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 18

Description

Functional description

2005-9015-009
01. August 2018

18 / 168

3.2

Product changes

Unauthorized product modifications can have a negative impact on the safety,
service life and functionality of the product.

Any modifications not described in the product documentation are deemed to
be prohibited.

For safety reasons, do not carry out any unauthorized changes!

Planned changes must be approved by the manufacturer in writing.

Any unauthorized modifications to the product will invalidate the warranty and
may invalidate the manufacturer's declaration or installation declaration
provided.

3.3

Functional description

The Fit R-300 system consists of a drive unit, corner wheels, scrapers, a cable
and a control panel.

The system operates by means of a control panel which powers the drive unit
motor(s) upon command. Subsequently, the scrapers move in the alleys as they
are linked together by a cable which ties to the drive unit drum. As the drive unit
operates, one scraper moves forward while the other moves backwards. When
a scraper reaches the cross gutter, the system operates in opposite motion.

1

7

2

3

4

6

5

5

8

3

Legend:

1

Drive unit

5

Stalls

2

Corner wheel

6

Cable (nylon or steel)

3

Scraper

7

Feeding alley

4

Cross gutter

8

Control panel

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов