GEA Fit R-300 Скачать руководство пользователя страница 130

Страница: 130 / 168

Programming

Farm-access

2005-9015-009
01. August 2018

130 / 168

7.21.4 Configuration

Note!

Once the connections are done, it can take up to 15 minutes for the
network to appear on the server.

● Go to https://www.farm-access.com;

● Click on Login;

● Enter the username and password provided when buying the farm-access

module;

● Click on Login;

● Click on Authorized dealer, the network should be added to the list.

7.21.5 Mobile phone application

● Access the App store or Google play store;

● Search for max access application;

● Click ”Install”;

● Once the installation has been completed, open the application and enter

the username and password provided.

7.21.6 Mobile phone notifications

Note!

Notifications can be sent on a mobile phone when a control panel is
in alarm mode.

Iphone

● Access the Iphone settings;

● Access the notifications tab;

● Find the max access applications;

● Select and activate the notifications.

Android

● Open the configuration menu of the application;

● Set the notifications switch to ON.

Содержание Fit R-300









































































































































































Результаты поиска

Содержание Fit R-300

Отзывы:

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 130 / 168

Результаты поиска

Содержание Fit R-300

Отзывы: