GEA Fit R-300 Скачать руководство пользователя страница 16

Страница: 16 / 168

Safety

Safety labels

2005-9015-009
01. August 2018

16 / 168

2.5

Protective devices

This product is equipped with safety parts protecting the user against
dangerous elements.

Those parts must be in perfect working condition and remain in place at all
times.

Replace if damaged, worn and/or defective. Refer to the part number.

Safety guard for corner wheel

16” (406 mm) model (part no. 2005-7508-090)
21” (533 mm) model (part no.2005-7508-100)

Safety guard for scraper cable tensioner

Single tensioner (part no. 2005-2005-180)
Double tensioner (part no. 2005-2005-170)

Transformer finger safe device

Control panel emergency stop button

2.6

Safety labels

The labels affixed on this product inform the user of the potential dangers, the
prohibited manoeuvres, the proper procedures and applications when
performing activities in connection with this product.

The labels must remain in place and legible at all times.

Replace when damaged. Refer to the part number for the appropriate label.

Refer to section Appendix - Label position.

Содержание Fit R-300









































































































































































Результаты поиска

Содержание Fit R-300

Отзывы:

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 16 / 168

Результаты поиска

Содержание Fit R-300

Отзывы: