manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 11 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 11

Preface

Specific Limited Warranty for Fit R-300 Cable Alley Scraper

2005-9015-009
01. August 2018

11 / 168

1.5

Specific Limited Warranty for Fit R-300 Cable Alley Scraper

This specific limited warranty extends to the Purchaser of all free stall cleaners
with cable (individually, the ”Cleaner System”) sold by the Company. All
conditions stated in this specific limited warranty are in addition to the General
Equipment Warranty that applies to all equipment sold by the Company (see
section 1.4 above).

1.5.1

Extent of Specific Limited Warranty

This specific limited warranty DOES NOT cover:

● Cable wear and tear and cable breaking that may arise after the installation.

Warranty on cable is limited to manufacturing defects detectable at the time
of installation;

● Wear and tear of corner wheels;

● Wear and tear of scrapers and all their components.

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов