GEA Fit R-300 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 168

GEA Fit R-300 Скачать руководство пользователя страница 15

Safety

Personnel qualifications

2005-9015-009
01. August 2018

2.4

Personnel qualifications

The manufacturer intends to determine the difference between trained
personnel and qualified personnel.

Trained personnel

The operator was trained by the manufacturer or its legal representative to
follow all safety rules, cleaning method, general maintenance as well as the
operating methods.

It is the operator's responsibility to inform the farm workers of those rules,
maintenance and methods.

Qualified personnel

Qualified personnel refers to those having obtained the academic knowledge
of a specific field of work.

This personnel has followed a training and subsequently obtained a
certification, diploma or any other official document provided by a recognized
academic facility in the country of study.

An equivalence may be required when operating in other countries.

The special qualifications required will be specified in each section.

Everyone who performs work or activities in connection with the product must
carefully read and understand the manual and then act accordingly.

«
...
13
14
15
16
17
...
»

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов