GEA Fit R-300 Скачать руководство пользователя страница 13

Страница: 13 / 168

Safety

Explanation of safety symbols

2005-9015-009
01. August 2018

13 / 168

2.2

Explanation of safety symbols

The safety symbols draw attention to the importance of the adjacent text.

The design of the notifications is based on ISO 3864-2 and ANSI535.6.

Safety symbols and key words

Danger!

The signal word ”Danger” indicates an immediate threat to the lives or
health of personnel.
Death or serious injury may result if the danger is not avoided.

Warning!

The indication ”Warning” signals danger to life or health of personnel.
Death or serious injury may result if the danger is not avoided.

Caution!

The indication ”Caution” signals a hazardous situation.
Minor or moderate injury may result if the danger is not avoided.

Attention!

The word ”Attention” indicates important information on risks for the
product or the environment.

Содержание Fit R-300









































































































































































Результаты поиска

Содержание Fit R-300

Отзывы:

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 13 / 168

Результаты поиска

Содержание Fit R-300

Отзывы: