manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 145 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 145

Maintenance

Safety instructions for maintenance

2005-9015-009
01. August 2018

145 / 168

11

Maintenance

11.1

Special qualification required for maintenance work

Maintenance work must be performed by trained personnel in accordance with
the safety instructions.

Electric work must be performed by a certified electrician.

Read the section Safety - Personnel qualifications.

11.2

Safety instructions for maintenance

Warning!

Inadvertent start!
Shutdown is required! Shut the main power supply and lock with a
locking device. Post a sign on the panel stating: ”Do not turn on,
electric work in progress” in order to prevent an inadvertent energizing
of the main electric supply.

Warning!

Risk of fall!
Be aware of the surroundings when working near areas such as a
storage pit, a cross gutter, a transfer pump hopper, etc.

Warning!

Risk of injury!
Keep all safety guards in place. When necessary to remove the guard,
reinstall the guard after completing the maintenance steps.

Caution!

Risk of injuries!
Wear protective boots, eye gear and gloves for all steps included in this
section.

Caution!

Risk of stumble!
Be aware of the cable in the free stall alleys.

Caution!

Slippery floor!
Manure makes the floor slippery, be aware.
Use the walkways when possible.

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов