manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 137 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 137

Operating

Manual mode operation

2005-9015-009
01. August 2018

137 / 168

9.4

Automatic mode operation

Note!

By default, the control panel operates in automatic mode according to the
”STARTING HOURS” or ”DELAY BETWEEN CLEANINGS” parameters. The
period during which the control panel operates is set by the ”NUMBER OF
STROKES (automatic)” parameter.

Note!

To operate in automatic mode, disengage the manual mode by releasing the
emergency stop button and re-arming the control panel.

Starting hours mode

The system operates automatically on scheduled hours. Once the cleaning strokes are completed, the system
stops until the next scheduled hour.

Delay between cleanings mode

The system operates continuously until the cleaning strokes are completed. The system stops according to the
delay between cleanings.

9.5

Manual mode operation

Instant start mode

The instant start mode manually starts the cleaning system. The number of strokes performed corresponds to

the value entered in parameter 

 

”NUMBER OF STROKES (START BUTTON)”

.

 Refer to section Programming

- Instant start function.

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов