manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 161 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 161

Decommissioning

Decommissioning/disposal

2005-9015-009
01. August 2018

161 / 168

12

Decommissioning

Decommissioning work must be performed by trained personnel in accordance
with the safety instructions.

Electric work must be performed by a certified electrician.

Read the section Safety - Personnel qualifications.

12.1

Safety instructions for decommissioning

Warning!

Risk of fall!
Be aware of the surroundings when working near areas such as a
storage pit, a cross gutter, a transfer pump hopper, etc.

Warning!

Risk of injury!
When releasing tension on a cable, a significant load is applied on the
wrench. Clean the tensioner and make sure the wrench is properly
inserted on the bolt head before applying force on the wrench. Before
releasing pressure on the wrench, make sure the tensioner is locked
in position.

Caution!

Risk of stumble!
Be aware of the cable in the free stall alleys.

Caution!

Slippery floor!
Manure makes the floor slippery, be aware.
Use the walkways when possible.

Caution!

Risk of skin irritation, cuts, finger pinching!
Wear protective gloves when handling the scrapers, steel cable,
lubricants, corner wheels, the electric motor, pulley and belt.

Attention!

Clean oil spills immediately and follow the local rules and regulations
on oil disposal.

● Shut and lock the main power supply.

● Disconnect all electric wires.

● Decommission all parts.

12.2

Decommissioning/disposal

Handle unused installation material properly and dispose in accordance with
current valid local regulations on waste disposal and utilization.

Recycle if possible.

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов