manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 158 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 158

Maintenance

Grease the scraper hinges

2005-9015-009
01. August 2018

158 / 168

11.11

Grease the scraper hinges

Every 3 months

Note!

Use PRECISION

TM

 GENERAL PURPOSE EP2 NLGI2 grease (or

equivalent). Do not use grease containing Molybdenum disulfide.

Warning!

Inadvertent start!
Shutdown is required! Shut the main power supply and lock with a
locking device. Post a sign on the panel stating: ”Do not turn on,
electric work in progress” in order to prevent an inadvertent energizing
of the main electric supply.

2

1

1

3

Caution!

Risk of finger pinching, cuts and skin irritation!
Wear protective gloves.

● Using a brush, apply grease on the scraper hinges (1).

● Using a grease gun, apply grease on the scraper hinges (2). The scraper

arms can be removed from the central part (3).

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов