GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 125 / 168

Programming
Diagnosis
2005-9015-009
01. August 2018
125 / 168
7.19 Diagnosis
IVR PRO
THIS FEATURE IS NOT AVAILABLE
IVR PRO Max@ccess
Alarm log displays the last 20 alarms and errors registered by the control
panel.
● Press ”SYSTEM”;
● Press ”DIAGNOSIS”;
● Press ”ALARM LOG”;
● Set the alarm using the keypad arrows;
● Press ”DETAIL” to get more information on the alarm.
”I/O STATUS” enables real time reading of each input­output.
● Press ”SYSTEM”;
● Press ”DIAGNOSIS”;
● Press ”INPUT/OUTPUT STATUS”;
The hour meter purpose is to program preventive maintenance interval on
an hourly basis. When the ”PARTIAL HOUR” value reaches the
”MAINTENANCE INTERVAL” value, a warning message displays
”MAINTENANCE REQUIRED”.
● Press ”SYSTEM”;
● Press ”DIAGNOSIS”;
● Press ”HOUR METER”;
● Press ”MAINTENANCE INTERVAL” and set the value (hour);
● To reset ”PARTIAL HOUR” after maintenance has been performed, press ”RESET
(PARTIAL)”;
● To disable the hour meter, set ”MAINTENANCE INTERVAL” to 0.
”SYSTEM STATUS” displays information on the system such as the
network information, I.P. address, MAC address, software version and real
time reading of voltage, frequency and P.F.
● Press ”SYSTEM”;
● Press ”DIAGNOSIS”;
● Press ”SYSTEM STATUS”;