GEA Fit R-300 Скачать руководство пользователя страница 160 | Manualshive

Страница: 160 / 168

GEA Fit R-300 Скачать руководство пользователя страница 160

Maintenance

General cleaning

2005-9015-009
01. August 2018

11.13

General cleaning

Every 6 months

Danger!

Risk of electric shock!
Never pressure wash electric equipment and components.

Warning!

Inadvertent start!
Shutdown is required! Shut the main power supply and lock with a
locking device. Post a sign on the panel stating: ”Do not turn on,
electric work in progress” in order to prevent an inadvertent energizing
of the main electric supply.

Caution!

Wear protective boots, eye gear and gloves.

Attention!

Use cold water to clean this product. Do not exceed 2000 psi (105 bar)
when using a pressure washer and keep the nozzle at a distance of
1ft (30 cm) from the surface to be cleaned.

● Clean manure buildup on the

scrapers, the corner wheels, the
alleys, etc.

● Remove manure build up in and out

of the drive unit.

● Apply grease on the drive unit bearings. Refer to section Maintenance -

Grease the drive unit bearings.

● Apply grease on the drive unit wheels and the corner wheels. Refer to

section Maintenance - Grease the drive unit wheels and the corner wheels.

● Reinstall all safety guards.

● Clean the control panel box with a dry cloth to remove all dust particles.

«
...
158
159
160
161
162
...
»

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов