manualshive.com logo in svg

GEA Fit R-300, Руководство по эксплуатации и инструкции по установке, Страница: 116 / 168

Поделиться
Скачать
GEA Fit R-300 Скачать руководство пользователя страница 116

Programming

Automatic cleaning mode using starting hours

2005-9015-009
01. August 2018

116 / 168

7.8

Automatic cleaning mode using starting hours

The control panel can perform up to 36 different starting hours per day.

For each starting hour programmed, the scrapers perform the number of strokes
set in the ”NUMBER OF STROKES” (automatic mode) parameter.

Note!

Scrapers can perform up to 10 strokes per cleaning.
Between strokes, the scrapers stop for 10 seconds.

Note!

A standard stroke configuration requires the scrapers to perform two
strokes to complete a cleaning cycle and return to start position. A
shuttle stroke configuration requires the scrapers to perform 4 strokes
to complete a cleaning cycle and return to start position.

IVR PRO

● Press key until (ProG) appears;

key

● Press key to select;

● Press keys to navigate through the different starting hours (H01 to H30);

● Press key to select;

● Press keys to change the starting hour.

● To erase an hour, decrease the time until 0:00 displays on the screen;

● To set the number of strokes, press key until (ProG) appears;

● Press key to select;

● Press key until (nbor) appears;

● Press key to select;

● Press keys to increase or decrease the value.

Содержание Fit R-300









































































































































































Отзывы:

Нет отзывов