GE H48681XB, Руководство по обслуживанию

Страница: 116 / 366

3.13.2.3 Adding a WLAN Profile
1. Press the Utilities key on the control console.
2. On the left side of the screen select Connectivity and then click the Device Setup tab.
3. Click the WLAN Configuration button; see Figure 3-65 on page 3-70 .
4. The Wireless Network Configuration tool with available Wireless Networks appear.
5. Select the Security tab and then click Add .
Figure 3-68 Security - Add
6. Add the following information to the Wireless Network Properties page:
-
Network Name (SSID)
-
Check box "Connect even if Network is not Broadcasting its Name (SSID)"
-
Network Authentication (Open, Shared Key, WPA PSK or WPA2 PSK)
-
Data Encryption
-
Network Key
-
Key Index
7. After you have filled in all the required information, click
OK
.
3.13.2.4 Refreshing a WLAN Network
1. Press the Utilities key on the control console.
2. On the left side of the screen select
Connectivity
and then click the
Device Setup
tab.
3. Click the
WLAN Configuration
button; see
Figure 3-65 on page 3-70
.
4. The Wireless Network Configuration tool with available Wireless Networks appear.
5. Click
Refresh
.
3.13.2.5 Setting a WLAN Network as Non-Preferable
When you make a WLAN non-preferable, you disconnect the network from the system and delete all
connection settings from the system. Afterwards the system WILL NOT try to reconnect to this WLAN
automatically. And if you want to reconnect, you will need to re-add this WLAN.
1.
Press the Utilities key on the control console.
2. On the left side of the screen select
Connectivity
and then click the
Device Setup
tab.
3. Click the
WLAN Configuration
button; see
Figure 3-65 on page 3-70
.
4. The Wireless Network Configuration tool with available Wireless Networks appear.
5. Highlight the wireless network you want to set as non-preferred.
6. Click
Make Non-Preferable
and confirm the message box.
Setup Instructions
3-72
Voluson E-Series Service Manual
KTD106657 Revision 2