manualshive.com logo in svg

GE Digital Energy L30, Инструкция по эксплуатации, Страница: 97 / 644

Поделиться
Скачать
GE Digital Energy L30 Скачать руководство пользователя страница 97

GE Multilin

L30 Line Current Differential System

4-1

4 HUMAN INTERFACES

4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE

4

4 HUMAN INTERFACES 4.1ENERVISTA UR SETUP SOFTWARE INTERFACE

4.1.1 INTRODUCTION

The EnerVista UR Setup software provides a graphical user interface (GUI) as one of two human interfaces to a UR device.
The alternate human interface is implemented via the device’s faceplate keypad and display (see the 

Faceplate interface

section in this chapter).

The EnerVista UR Setup software provides a single facility to configure, monitor, maintain, and troubleshoot the operation
of relay functions, connected over local or wide area communication networks. It can be used while disconnected (offline)
or connected (online) to a UR device. In offline mode, settings files can be created for eventual downloading to the device.
In online mode, you can communicate with the device in real-time.

The EnerVista UR Setup software, provided with every L30 relay, can be run from any computer supporting Microsoft

 

Win-

dows 95, 98, NT, 2000, ME, and XP. This chapter provides a summary of the basic EnerVista UR Setup software interface
features. The EnerVista UR Setup Help File provides details for getting started and using the EnerVista UR Setup software
interface.

4.1.2 CREATING A SITE LIST

To start using the EnerVista UR Setup software, site and device definition are required. See the EnerVista UR Setup Help
File or refer to the 

Connecting EnerVista UR Setup with the L30

 section in Chapter 1 for details.

4.1.3 ENERVISTA UR SETUP OVERVIEW

a) ENGAGING A DEVICE

The EnerVista UR Setup software can be used in online mode (relay connected) to directly communicate with the L30 relay.
Communicating relays are organized and grouped by communication interfaces and into sites. Sites can contain any num-
ber of relays selected from the UR-series of relays.

b) USING SETTINGS FILES

The EnerVista UR Setup software interface supports three ways of handling changes to relay settings:

•

In offline mode (relay disconnected) to create or edit relay settings files for later download to communicating relays

•

While connected to a communicating relay to directly modify any relay settings via relay data view windows, and then
save the settings to the relay

•

You can create/edit settings files and then write them to the relay while the interface is connected to the relay

Settings files are organized on the basis of file names assigned by the user. A settings file contains data pertaining to the
following types of relay settings:

•

Device definition

•

Product setup

•

System setup

•

FlexLogic

•

Grouped elements

•

Control elements

•

Inputs/outputs

•

Testing

Factory default values are supplied and can be restored after any changes.

The following communications settings are not transferred to the L30 with settings files.

Modbus Slave Address
Modbus IP Port Number
RS485 COM2 Baud Rate
RS485 COM2 Parity
COM2 Minimum Response Time

Содержание L30





































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов