manualshive.com logo in svg

GE Digital Energy L30, Инструкция по эксплуатации, Страница: 142 / 644

Поделиться
Скачать
GE Digital Energy L30 Скачать руководство пользователя страница 142

5-16

L30 Line Current Differential System

GE Multilin

5.2 PRODUCT SETUP

5 SETTINGS

5

The Supervisory menu settings are available for Supervisor role only or if the Supervisor role is disabled then for the
Administrator role only.

Figure 5–3: SUPERVISORY PANEL

Local Authentication:

 When enabled (i.e., "Yes" is selected) Local Authentication with roles is enabled. When this setting

is disabled the UR only authenticates to the AAA server (Radius). This means the front communications port is disabled as
well. The setting is enabled by default.

Bypass Access:

 Enabling this setting allows 502 ethernet sessions to the relay. The serial ports (RS232 and RS485) allow

settings write. No passwords or roles are required when in this mode. When disabled, everything goes back to normal. This
setting has no effect on the front panel and it continues to support Role Based Access Control (RBAC).

Lock Relay:

 This setting uses a Boolean value (Enable/Disable) to indicate if the device accepts setting changes and

whether the device can receive a firmware upgrade. This setting can be changed only by the Supervisor role, if it is enabled
or by the Administrator if the Supervisor role is disabled. The Supervisor role enables this setting for the relay to start
accepting setting changes or command changes or firmware upgrade.  After all the setting changes are applied or com-
mands executed, the Supervisor disables to lock setting changes.

Example:

 If this setting is "Yes" and an attempt is made to change settings or upgrade the firmware, the UR device denies

the setting changes and denies upgrading the firmware. If this setting is "No", the UR device accepts setting changes and
firmware upgrade.

This role is disabled by default.

MODE

SERIAL (RS232 & RS485)

502 ETHERNET

SSH ETHERNET

Bypass Access = Disable

Local Authentication

and Role Based Access 

Control (RBAC)

and passwords in clear

Read only

Local/Remote Authentication

and Role Based Access Control (RBAC)

and passwords encrypted

Bypass Access = Enable

No Role Based Access Control 

(RBAC)

and no passwords

No Role Based Access 

Control (RBAC)

and no passwords

Local/Remote Authentication

and Role Based Access Control (RBAC)

and passwords encrypted

Содержание L30





































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов