GE Digital Energy L30 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 644

GE Digital Energy L30 Скачать руководство пользователя страница 23

GE Multilin

L30 Line Current Differential System

1-13

1 GETTING STARTED

1.3 ENERVISTA UR SETUP SOFTWARE

1

Before using the Quick Connect feature through the Ethernet port, disable any configured proxy settings in Internet
Explorer.

1.

Start the Internet Explorer software.

2.

Select the

Tools > Internet Options

menu item and click the

Connections

tab.

3.

Click on the

LAN Settings

button to open the following window.

4.

Ensure that the “Use a proxy server for your LAN” box is not checked.

If this computer is used to connect to the Internet, re-enable any proxy server settings after the laptop has been discon-
nected from the L30 relay.

1.

Start the Internet Explorer software.

2.

Select the “UR” device from the EnerVista Launchpad to start EnerVista UR Setup.

3.

Click the

Quick Connect

button to open the Quick Connect dialog box.

4.

Select the

Ethernet

interface and enter the IP address assigned to the L30, then click the

Connect

button. The EnerV-

ista UR Setup software creates a site named “Quick Connect” with a corresponding device also named “Quick Con-
nect” and displays them at the upper-left of the screen.

5.

Expand the sections to view data directly from the L30 device.

Each time the EnerVista UR Setup software is initialized, click the

Quick Connect

button to establish direct communica-

tions to the L30. This ensures that configuration of the EnerVista UR Setup software matches the L30 model number.

When direct communications with the L30 via Ethernet is complete, make the following changes:

1.

From the Windows desktop, right-click the

My Network Places

icon and select

Properties

to open the network con-

nections window.

2.

Right-click the

Local Area Connection

icon and select the

Properties

item.

3.

Select the

Internet Protocol (TCP/IP)

item from the list provided and click the

Properties

button.

«
...
21
22
23
24
25
...
»

Содержание L30





































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов