Garmin CIRRUS PERSPECTIVE TOUCH+, Руководство по эксплуатации кабины

Страница: 186 / 324

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin 190-02954-01 Rev. A 160
Additional Features
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EAS
Audio and
CNS
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
CONNEXT REGISTRATION
Registering the system for datalink services:
1)
From MFW Home, touch
Utilities > Setup
>
Avionics Status
.
2)
If necessary, touch the Airframe Tab. Note the System ID. This number will be needed
when contacting Garmin Connext to establish the account.
3)
Touch the LRU Info Tab. Scroll to view ‘GSR1.’ Note the serial number of each will also
be needed when contacting Garmin Connext.
4) Contact Garmin Connext to establish an account and receive an access code.
5) From MFW Home, touch
Services > Connext Setup >
, then touch the
REG
Tab.
6)
Press the Register Button.
7)
Enter the access code.
8) Touch the Enter Button.
BLUETOOTH ENHANCEMENTS
When the GMA 36B Audio Controller is installed, the system supports a Bluetooth link for
audio to a Portable Electronic Device (PED) (e.g., a personal cell phone, Garmin VIRB ® , etc.).
See the Connext Section in Additional Features for PED pairing instructions. This link enables
a two-way telephone call between the system and the PED. This arrangement allows the flight
crew to talk on a PED cell phone call through the aviation headset. The system also supports
exchange of telephone related data and control commands between the PED and the Garmin
Integrated Flight Deck (GIFD). These controls allow the flight crew to manage incoming and
outgoing cell phone calls without requiring access to the PED based menu.
When a PED Bluetooth link is connected to the system, the system provides the following
capability through the Touchscreen controller based user interface. This menu is located on
the ‘Services’ Page. With a Bluetooth audio connection you can:
– Answer, ignore, hold, or end a call.
– View a calling number and name as reported by the connected PED.
– Initiate a call from the Touchscreen Controller using avionics contacts, Bluetooth contacts,
or the dial pad
– See the signal strength graphic for the connected cell phone.
– Isolate the call to the pilot/copilot (using the
Isolate
Button).
The flight crew can manually add contacts to the contacts list (‘Stored’ Contacts). Alternately,
the system can import contacts directly from the PED (‘Pilot Bluetooth’ Contacts). The flight
crew can browse these imported contacts and initiate a cell phone call. The system automati-
cally syncs PED contacts after the Bluetooth connection is made.