12
z
Alternative (default)
If the
Alternative
method is chosen, the
system will try reporting sequence in cycle of
each IP addresses / Tel. numbers. A max of 5
cycles will be tried.
<
<
N
N
O
O
T
T
E
E
>
>
)
An interval of report retry period is 8
secs.
)
When the Control Panel is connected
to the internet, IP reporting via internet
(IP) has higher priority than via GPRS.
z
If all set as first priority, calling sequences
will be:
IP/GPRS #1
Æ
IP/GPRS #2
Æ
TEL #1
Æ
TEL #2…and repeat for 5 cycles
<
<
N
N
O
O
T
T
E
E
>
>
)
If no Account Number is programmed,
the Control Panel will not dial.
)
When only one Central Station
telephone number is stored and that
number is engaged, the Control Panel
will automatically redial that number
with an interval of 30 sec. between
dialing attempts.
)
When two Central Station telephone
numbers are stored, the Control Panel
will dial in accordance to the set
priority order. If the number being
dialed is engaged, it will try the next
number. The redial interval between
each number is 5 sec.
)
No matter what the method of contact
is, all First Priorities will be carried out
before the system moves onto Second
Priorities. Within the same level of
priority, IP address still has a higher
priority than Tel. number.
)
No matter what the Retry Method is, if
none of IP or Tel number go through in
the first cycle, then the reporting will
never give up. It will keep retrying until
at least ONE IP or Tel go thru, then
stop.
2.2. Installer code
z
The Installer Code is used to enter Installer
Menu.
z
Factory default:
7982
To set the Installer Code:
Step 1.
Enter the Installer Code menu by
press
OK
, then the the Installer Code
Menu will be displayed.
E n t e r N
e w
C
o d e
. . . .
Step 2.
Enter your new 4 digit Installer code
and press
OK
again. The following
screen will be displayed:
R e p e a t N e w C o d e
. . . .
Step 3.
Enter your new installer code again
and press
OK
to confirm. It will then
return to the Installer menu.
<
<
N
N
O
O
T
T
E
E
>
>
)
In Step 2, if the code does not match,
a Code incorrect prompt message will
be displayed 2 sec., and you are
requested to repeat Step 1.
)
The password cannot be duplicated. If
the code has been used, the screen
will display
code in use
and require
you re-enter a new code.
Содержание CTC-1241GT
Страница 1: ...f 25 MAR 2010 For THIRKILD DENMARK...
