1.
Function Button/LED Indicator
•
Press and hold for 10 seconds to enter the pairing mode when learning it into the gateway.
•
LED flashes once: When the button is pressed
•
LED continuous flash: The Siren is under pairing mode or the system is in the alarming mode
abode Indoor Siren (abode RF)
Siren - User Guide
1
Introduction
The abode indoor siren is AC Powered with a rechargeable battery. It is capable of sounding its 95dB siren
when the abode alarm system is activated. It can be plugged into any indoor AC power outlet.
2. Alarm Volume and entry exit beep sounds
(Refer to page 4 & 5)
•
Alarm siren volume: Is not adjustable
•
Entry / Exit / Arm / Home Arm / Disarm (These Sounds (Beeps) are defaulted to OFF. User
controllable from web app, under the account tab on the left / system settings.
3. AC Connect
(Plug into local wall AC outlet)
Power Supply
The Siren is powered by AC power; plug the Siren into a power outlet to activate the Siren. The Siren will
enter normal operation mode.
Battery backup
There is a rechargeable battery inside the Siren that serves as a backup in case of a power failure. During
normal operation, AC power is used to power the Siren and at the same time recharge its battery.
After AC power failure
, the battery will provide power to the siren for 12 hours, then transmit a Low Battery
signal to the gateway and send notifications. After AC is restored and battery is fully recharged, the Siren will
transmit a low battery restored notification to the gateway.
abode Systems Inc. Visit our support page for more information
http://support.goabode.com/
2016
abode reserves the right to update this product information at any time without notice.
