4
1.5. How to Install the Control
Panel
The easiest way to get to know the system
and get it up and running quickly is to get
all the devices and accessories
programmed on a tabletop before locating
and mounting them.
The Control Panel can be mounted on the wall
or wherever desired. Ensure the Control Panel
is fitted at approximately chest height where
the display can be easily seen and the keypad
is convenient to operate.
z
Using the 4 holes of the Wall Mounting
Bracket as a template, mark off the holes’
positions.
z
Drill 4 holes and affix the screws & plugs
provided.
z
Hook the CTC-1241 unit onto the Wall
Mounting Bracket (holding the unit with
the front facing you).
1.6. Four – Level Passwords
In order to provide highest security in operating
the system, CTC-1241 offers 4 levels of
authorization.
<
<
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
N
N
O
O
T
T
E
E
>
>
)
There are two operation areas in the
system. Each area can be set /
programmed individually.
)
To change between areas 1 & 2, press
& hold # and
＊
for 3 sec, two short
beeps will sound.
User PIN Code
z
PIN Code is the 1
st
level of passwords.
z
Areas 1 & 2 can have up to 50 PIN
codes in total. You may set any
combination within the two areas, as
long as they add up to 50. (E.g. 8 PIN
in Area 1 + 42 in Area 2, or 30 in Area
1 + 20 in Area 2.)
z
When an identical PIN code is in both
Areas 1 & 2, then that PIN code
becomes Global PIN. When entering
Global PIN code in either area, you
may select to control either area or
both areas (please refer to section
4.1.
Entering User Menu
).
<
<
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
N
N
O
O
T
T
E
E
>
>
)
No two codes can be identical within
the same area. If so, the message,
Code in use
will be displayed to
prompt the user to choose differently.
)
User 1 PIN code can be changed, but
cannot be deleted in any way.
z
Whenever the panel asks to key in
Enter
Code
or
P-Code
, please enter your User
PIN Code.
z
User Pin Codes:
Pin Code #1, Area 1:
1234
Pin Code #2, Area 2:
4321
Set as factory default.
z
User 3-50 PIN codes are deactivated by
factory default.
Master Code
z
The Master Code has the authorization to
enter Programming Mode. When the
display panel asks you to key in
M-Code
,
please enter your Master Code.
z
Master Code:
Area 1 & 2:
1111
Set as factory default.
Installer Code
z
The Installer Code is for the installer to
program system parameters under
installer menu, such as Tel. Number,
Account Number, etc.
z
When the display panel asks for
I-Code
,
please enter your Installer Code.
z
Installer Code:
Area 1 & 2:
7982
Set as factory default.
Содержание CTC-1241GT
Страница 1: ...f 25 MAR 2010 For THIRKILD DENMARK...
