Gardsman CTC-1241GT, Руководство по установке

Страница: 58 / 73

54
4.14.2. Alarm Memory
If an alarm is raised without being silenced
during your absence, and the alarm reporting
has been carried out; the screen will stay on
the
Alarm warning display.
A 1 - A l a r m A l a r m
A 2 - A l a r m O f f
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
>
>
)
Area 1 – Alarm
Area 2 – Alarm off mode
z
When you come back and disarm the
system by pressing the
DISARM button on
the Remote controller, the Alarm warning
display still remains unchanged.
z
To clear the display, follow the same steps
as
Stopping the Alarm described above,
you can see the source of the alarm.
z
If more than one alarm events including
Device Tampered have occurred,
repeatedly press further keys, the alarm
events will be displayed one by one
sequentially until all events have been
displayed, then the screen returns to
Alarm off .
4.15. False Alarm
Management
CTC-1241 has 3 built-in regulatory false alarm
management facilities:
9
Dual-Ply Entry Warning
9
Alarm Abort Reporting
9
Sequential Verification Alarm
Reporting
4.15.1. Dual-Ply Entry Warning
z
This is to warn the user that an alarm
report to the Central Monitoring Station will
be made.
z
If a zone programmed as Entry or Away
Entry, with no correct PIN code entered
within the programmed Delay period, a 30-
sec internal alarm period is given before an
alarm report is made.
z
If a valid user PIN code is entered within
the 30-sec internal alarm period, the alarm
sound will be stopped and the system
returns to normal status without reporting.
z
If no valid user PIN code is entered, a
burglar alarm will be sent.
4.15.2. Mis Operation Reporting
z
With Latchkey reporting ( Latch Rpt ) set as
On , all Arm / Home / Day Home / Night
Home / Disarm actions of the User PIN
code is reported to the Central Monitoring
Station automatically each time.
4.15.3. Sequential Verification
Reporting
z
A sequential verification alarm report is
generated when a second alarm from a
different Burglar DC or Burglar IR is
registered within a 30-min period.
z
This Sequential Verification Report will be
sent in addition to the zone alarm report.
z
Alarms cannot be verified after the Entry
Delay is initiated.