Gardsman CTC-1241GT, Руководство по установке

Страница: 56 / 73

52
4 . 14. Stop the Alarm and
Alarm Display
During any alarm, the Control Panel will sound
its siren and report to the Central Monitoring
Station and the display will show.
A 1 - A l a r m A l a r m
A 2 - A l a r m O f f
< < E E X X A A M M P P L L E E > >
)
Area 1 – Alarm
Area 2 – Alarm off mode
4.14.1. Stopping the Alarm
During an alarm, to stop the siren and clear
display:
4.14.1.1. Using User PIN Code
Step 1. Key in your PIN code, and then press
OK .
<
<
N
N
O
O
T
T
E
E
>
>
)
if you press any key other than the
first digit of your PIN code, the screen
will prompt you to enter your PIN code.
Step 2. If the PIN code is correct, then the
alarm sounding will be stopped.
<
<
N
N
O
O
T
T
E
E
>
>
)
When entering any PIN codes, if
incorrect codes have been supplied
for 4 times, or over 20 numeric
characters have been entered, it will
inhibit further key presses for 1 minute.
Step 3A. If the reporting is not complete, the
screen will display:
R e p o r t i n g . . .
P l e a s e Wa i t !
After the system reported completely,
the screen will show:
P r e s s “ O K ”
t o c o n t i n u e !
Press OK to continue.
Step 3B. If the reporting is complete , the
display will show you the triggered
event directly.
Step 4. The display will show you the device
that triggered the alarm with its zone
number:
A l a r m S t a r t e d b y
0 1 ). I R H a l l w a y
)
If there is more than one alarm events
raised, the Control Panel continues to
display the 2nd alarm event with 02).
Starting at the beginning of the 2nd
line.
Step 5. Repeat pressing further keys until all
alarm events are displayed thoroughly,
and then press
OK.
<
<
N
N
O
O
T
T
E
E
>
>
)
If the reporting has failed, the screen
will show:
S y s t e m r e a c h e d
N o n e
Press OK to continue.
)
If the alarm is stopped within 90 sec.
The system will send another alarm
cancellation report to the Central
Morning Station and the screen will
show:
A l a r m s t a r t e d b y
C a n c e l
Press OK to continue.
)
If the alarm is stopped after 90 sec,
the display of Step 6 will not show.
Step 6. The screen will show:
C l e a r A l a r m
D i s p l a y ? ( O K ? )
Step 7. Press OK , the display returns to Alarm
off.
<
<
N
N
O
O
T
T
E
E
>
>
)
When an alarm (other than Panic
Alarm) is raised, press the
Disarm
button on the Remote Controller will
also stop the alarm (Optional).
)
Panic Alarm must be silenced at the
Control Panel. This is to prevent the
Remote Controller from being
snatched from the user and silence
the alarm using the Disarm button.