Gardsman CTC-1241GT, Руководство по установке

Страница: 47 / 73

43
4.2. Away Arm Mode (Alarm
ON)
4.2.1. Away Arming the System
If the system is in Alarm off mode, and Away
Arming the system is wished, please follow the
steps below:
Step 1. Move the cursor to Away Arm position
and press OK . The following screen
will display:
T i m e T o E x i t
3 0 s e c
The defined EXIT Delay timer starts
to count down.
<
<
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
N
N
O
O
T
T
E
E
>
>
)
During the Exit Delay Count Down
Period:
„ Exit Delay Sound:
If it is set as ON , there will be a beep
at every second, until the Count
Down timer expires.
If it is set as OFF , a silent count
down will be performed.
„ Latch Report Option:
If it is set as ON , an Away Arming
report will be sent to Central
Monitoring Station.
If it is set as OFF , no report will be
sent.
Step 2. When Exit Delay timer expires , or the
Final Door is closed (i.e. only if the
Door Contact is set as Entry Attribute
with Final Door option set as ON), the
Control Panel will perform a long beep
and the system is now in Away Arm
Mode.
<
<
N
N
O
O
T
T
E
E
>
>
)
When Final Door Option is set as Off ,
the Control Panel enters Alarm On
mode only when the Exit Delay time is
up.
)
The system can also be armed by
pressing the “LOCK symbol” the
Remote controller (Only if the Remote
Controller Entry option is Enabled).
4.2.2. Stopping the Exit Delay
Exit Delay timer can be stopped by using
Control Panel / Remote Controller / Remote
Keypad to disarm the system.
Step 1. Press key, and the screen will ask
you to enter User PIN code while the
system continues to count down.
Step 2. Enter the User PIN code followed by
OK , two short beeps will be emitted,
indicating that the system is now
returned to Alarm off mode.
4.2.3. Extend the Exit Delay
During the Exit Delay Period, the delay time
can be extended by pressing the
ARM button
on the Remote Controller or Remote Keypad.
Each time the
ARM button is pressed, the
delay time will start counting from the
beginning.
< < I I M M P P O O R R T T A A N N T T N N O O T T E E > >
)
For the below options of Home Arm ,
Day Home Arm and Night Home
Arm , they are specially designed to
provide flexibility to partially Arm the
system.
)
Depending on the assigned Device
Attribute, the system will operate
differntly according to the nature of
Attributes.