Gardsman CTC-1241GT, Руководство по установке

Страница: 11 / 73

7
Step 3. Key-in desired phone number.
Step 4. Press OK key to choose the reporting
priority sequence.
o F i r s t p r i o r i t y
S e c o n d p r i o r i t y
<
<
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
N
N
O
O
T
T
E
E
>
>
(1) First Priority: The system must report to
this phone number first (in priority order)
and successfully.
If more than one set of Tel. Number and/or
IP Address (see section 1.2 IP. Setting) is
set as first priority, all of them must be
reported, and all reporting must be
successful.
When both IP address and Tel. number are
set as first priority, the IP address is in
higher priority for reporting.
(2) Second Priority: For back-up reporting.
The system excutes the reporting based on
your setting as a back-up method. (see
section
2.1.3. Back-up Method )
(3) If Tel. numbers 1) and 2) are BOTH set as
either First Priority or Second Priority, then,
the system will dial out number 1) first.
Step 5. Press OK to confirm your setting.
< < N N O O T T E E > >
)
The maximum length of a number is
30 digits including
¿
& # . If this
length is reached, the Control Panel
will sound 5 beeps and no key can be
pressed except and
OK keys.
)
While entering the number, when the
15th position is reached, non-fitting
numbers will scroll to the left.
)
Four dots are displayed to indicate no
telephone number has been set.
z
Change Tel. Numbers
Apply Steps 1-5 from Store Tel. Numbers
section on the number that is wished to change.
New numbers will overwrite the previous one.
z
Delete Tel. Numbers
Step 1. Apply Steps 1 & 2 from Store Tel.
Numbers section on the number that
is wished to delete.
Step 2. Press
key to cancel the numbers.
Step 3. Press OK and the previous stored
number is now deleted.
2.1.1.2 Account
z
Store Acc. Numbers
It allows you to set/change/delete the 4 or 6-
digit Account Number corresponded to the
Central Station numbers that have been
programmed.
Step 1. Move the curser to the Account
submenu and press OK key.
o 1 ) . . . .
2 ) . . . .
Step 2. Select 1 or 2, and press OK key.
E n t e r A c c . N o
. . . . . . . . . . . . . . . .
Step 3. Key-in the 4- or 6-digit Account
Number.
After the account number is entered, the
system will show the display as bellow for you
to select desired reporting format.
o C I D
S I D
A: CID Æ Contact ID format reporting to
CMS Digital Receiver (for 4- or 6-digit
account number)
The Control Panel sends reporting messages
with Contact ID format to Central Monitoring
Receiver. For Example, when the Wrist
Transmitter (WTR) or Emergency Pendant is
pressed, the Contact ID event code 101 will be
sent.
B: SID Æ Contact ID format reporting to
CMS SMS Receiver (for 4-digit account
number)
The Control Panel sends SMS message with
Contact ID format to Central Monitoring
Receiver. For Example, when the Wrist
Transmitter (WTR) or Emergency Pendant is
pressed, the Contact ID event code 101 will be
sent via SMS.