Gardsman CTC-1241GT, Руководство по установке

Страница: 30 / 73

26
)
B for Burglar PIR Detector
)
O for Home Omit PIR Detector.
)
DO for Day Home Omit PIR
Detector.
)
NO for Night Home Omit PIR
Detector.
)
A for Home Access PIR Detector.
)
D for Delay Zone PIR Detector.
)
Y for Away Only PIR Detector.
)
E for Entry PIR Detector.
)
P for Away Entry PIR Detector.
StepB7. Follow the same learning procedure
as described in section 2.3.6.1 Add
Devices, step A8-A9 to confirm
learning & naming the device.
External PIR
StepC7. You are now invited to give a name
or location description to the device
to help understand system events.
You can enter up to 10 letters as you
please for the name followed by
OK
or just press OK for no name.
Please see section Device Naming
for details.
E n t e r N a m e + O k
. . . . . . . . . .
StepC8. Press OK when finished and the
display will show the new zone name
next to the device.
StepC9. Press OK confirm, adding an EIR is
now complete. Screen returns to
the
/- menu.
<
<
N
N
O
O
T
T
E
E
>
>
)
When EIR is triggered in Away Arm
mode, the Control Panel will sound its
alarm siren. The LCD display remains
as unchanged. No reporting will be
made.
)
When EIR is triggered in Home/Day
Home/Night Home Arm mode, the
Control Panel will emit a warning beep
every 2 sec until the pre-defined Alarm
Length expires. The LCD display
remains unchanged. No reporting will
be made.
)
When EIR is triggered in Alarm off
mode, the Control Panel will not
respond.
)
When EIR’s Tamper is triggered in
Away Arm mode, the Control Panel
will sound its alarm and reporting will
be sent.
Remote Controller
StepD7. After a zone number for the RC is
assigned, the device attribute will be
displayed for selection:
o S i l e n t P a n i c
P e r s o n a l A t t
M e d i c a l E m g
F i r e
A U X
< < N N O O T T E E > >
)
S for Slient Panic Remote
Controller
If the device attribute is set as Silent
Panic , when the panic button is
pressed & held for 3 seconds or
pressed twice within 3 seconds,
Control Panel will report a
Slient
Panic alarm, without an audible siren.
An event code of 122 will be reported.
)
P for Personal Attack Remote
Controller
Control Panel will give a Personal
Attack alarm when the panic button
is pressed & held for 3 seconds or
pressed twice within 3 seconds. An
event code of
120 will be reported.
)
M for Medical Emergency Remote
Controller
Control Panel will give a Medical
Emergency alarm when the panic
button is pressed & held for 3
seconds or pressed twice within 3
seconds. An event code of
101 will be
reported.