Gardsman CTC-1241GT, Руководство по установке

Страница: 42 / 73

38
2.5.6. SMS P-Word
SMS Program keyword is a password to
authorize Remote Setting or Remote
Upgrading.
SMS Program keyword is used to recognize
the identity of a valid user, and to give authority
for Remote Setting (through SMS Text) or
Remote Upgrading purposes (through GPRS).
This keyword will need to be entered whenever
Remote Setting or Remote Upgrading is
required.
Enter the SMS P-word by pressing OK , the
following screen will be displayed:
E d i t s c r e e n
Enter your favorable keyword (max. 15
alphanumeric characters) and press
OK . The
keyword will then be saved.
<
<
N
N
O
O
T
T
E
E
>
>
)
For programming via SMS, please
refer to section
SMS Remote
Installing Command .
)
A SMS message may contain up to
168 characters, including spaces &
symbols.
)
A SMS message may contain multiple
SMS commands by using “+”, as long
as it is equal or less than 168
characters. For Example:
“ PROG_7982_Tamper:0+CDOOR:10
+RC-ET:10 ”, where “_” means a
space.
)
Deletion of characters represents no
input value. For example:
“
PROG_7982_PORT1:_ +_ PORT2: ”,
where “_” means a space.
)
Deletion of user names represents
area no input value. For
example: “
PROG_7982_UNAM1:1 ”,
where “_” means a space.
2.5.7. Remote Controller Entry
Enable Select (RC Ent E)
This is to Turn On or Off the Remote Controller
disarm function.
R C E n t E O p t
R C E n t E O n
R C E n
t E O f f
z
RC Ent E On (Remote Controller Entry
Enable On)
is set as factory default.
<
<
N
N
O
O
T
T
E
E
>
>
)
When selected as On or Off , all new
leant Remote Controller will use the
same setting. During the learning
process, an option to turn On or Off
Remote Controller Entry will not be
shown.
)
When selected as Opt (Option) , when
new Remote Controllers, an option to
turn On or Off Remote Controller
Entry will be shown.
)
Changing the Remote Controller Entry
Enable Select settings will not affect
the previous learnt Remote Controller
settings saved in the Control Panel.
)
When RC ENT E Off (Remote
Controller Entry Enable Off) is
selected, it is not possible to disarm
the Control Panel when the system is
fully armed.
)
The feature is used to ensure that the
system cannot be disarmed with a
stolen Remote Control without
unlocking a door first.
)
When RC ENT E On (Remote
Controller Entry Enable On) is
selected, the Remote Controller can
arm and disarm the control panel as
normal without activating an entry
point.
)
However, when an alarm is triggered
by the panic buttion on the RC, it is
prohibited to use the same RC to
disarm.