7
-
38
Cardiac Output Setup
Before measuring the cardiac output, set the measurement condition such as ON/OFF of auto start,
injection condition, etc.
1
Press the Menu
→
Function
→
Cardiac Output
→
Setup keys.
The cardiac output configuration menu will be displayed.
Set the measurement condition such as ON/OFF of auto start,
displaying scale of thermodilution curve, CC value for injection,
etc.
2
Set ON/OFF of “Auto Start”.
ON will automatically start the measurement without
pressing the CO Start key.
OFF will start the measurement only when the CO Start
key is pressed.
Even when ON is selected, the measurement can be
manually started by pressing the CO Start key.
3
Set the time scale.
Select the time scale of the thermodilution curve from
30sec. / 60sec.
4
Set the computation constant.
Auto Input key will automatically input a pre-determined
computation constant into the formula for the cardiac output
calculation. The constant depends on the size of the catheter
and the injection volume.
Manual Input key will allow to manually input the
computation constant for the used catheter.
Time Scale
Содержание DynaScope 7000 Series
