Fukuda Denshi DynaScope 7000 Series, Руководство по эксплуатации

Страница: 117 / 475

4 － 69
4
Select ON/OFF of oscillation graph printing.
ON will print the oscillation graph (NIBP data) after
the waveform.
OFF will not print the oscillation graph.
5
Set the recorder operation for the built-in recorder.
Set the paper feed operation for the recorder.
Both will start the recording from the perforation, and
feeds the paper to the next perforation after recording so
that the paper can be easily cut off.
Top will start the recording from the perforation, and will
not feed the paper after recording.
End will start the recording from the position where the
previous recording ended, and feeds the paper to the next
perforation after recording so that the paper can be easily
cut off.
OFF will start the recording from the position where the
previous recording ended, and will not feed the paper after
recording.
Set the recording speed for the built-in recorder.
6
Select the 8ch recorder and recording speed.
The wired network system is capable of connecting
maximum of eight 8ch recorders. Select the recorder
number if a 8ch recorder is selected as output recorder.
The recorder number which is not connected to the network
cannot be selected.
Set the recording speed for the 8ch recorder.
4
Re
cording Se
tup