Fukuda Denshi DynaScope 7000 Series, Руководство по эксплуатации

Страница: 191 / 475

6 － 43
SpO
2
(Masimo
®
Model; DS-7000M)
This menu allows setting the SpO
2
monitoring condition for DS-7000M (Masimo
®
Model).
Size
: Sets the pulse wave size
SpO
2
Alarm : Sets ON/OFF the SpO
2
alarm, upper and lower alarm limit.
HR/PR Alarm : Sets ON/OFF the HR/PR alarm, upper and lower alarm limit.
Setup
: Sets the SpO
2
monitoring condition.
C A U T I O N
Take the following precautions when monitoring over a long period of time.
y To avoid skin rash or low-temperature burn, it is recommended to
change the measurement position several times a day.
Be especially careful when continuously using on neonates, infants,
or patients with peripheral circulatory disturbance.
y Direct sunlight to the sensor area can cause measurement error.
Place a black or dark cloth over the sensor in these environments.
When not measuring, unplug the relay cable and sensor from the
SpO
2
connector. Otherwise, the outside light may affect the displayed
measurements.
C A U T I O N
z The light-emitting part of the sensor should be over the root of the
fingernail. Do not insert the finger too far into the sensor as it may hurt the
patient.
z The sensor is not designed for long-term use. Replace the sensor or
move to another finger every 4 hours for reusablable sensor, every 8
hours for disposable sensor, or if any inhibition is detected in tissue blood
flow.
z Measuring on a limb with the NIBP cuff, arterial catheter, or intracatheter
may result in incorrect measurement.
C A U T I O N
Do not secure the adhesive tape too tight as it may obstruct the blood flow.
6
SpO
2
(Ma
sim
o
®
Model; DS
-70
00M
)