Fuji Electric micrex-sx NP1F-MP1, Руководство пользователя

Страница: 100 / 250

5-45
5-3 I/O Area of NP1F-MP2
) r o r r e n o i s s i m s n a r T : e m a n l a n g i S ( 5 1 t i B
<Description>
• In the pulse generation mode or position command mode, when the error monitoring signal does not change for a
given period of time (which is set in the error monitoring timer register), this signal becomes “1.”
When the rising edge at which the command pulse register reset signal changes from "0" to “1” and the rising edge
at which alarm reset signal changes from “0” to “1” are detected, this signal returns to “0.”
While this signal is “1,” the start command is not accepted.
(For details, refer to the paragraph for error monitoring signal.)
Transmission error
(PC <== MP2)
Command pulse register reset
(PC == > MP2)
“1”
“1”
Alarm reset
(PC == > MP2)
“1”
Error signal cannot be reset
because the command pulse
register reset signal is OFF.
“1”